Re: "OLD" edwards fitting

Hi,

so far as I know this type of fitting is no longer manufactured. I´ve
found them very convenient. But obviously this design didn´t convince
customers and other manufacturers. We stock some old one´s, which we
took from old mass spectrometers to support existing systems.

Regards
VG

Tom McCloud <[EMAIL PROTECTED]> wrote in message news:<[EMAIL PROTECTED]>...
} Ozgur,   I remember seeing that style of fitting years ago.
} When I am looking for vacuum fittings of all sorts I have ordered from
} the Kurt Lesker company.   They have a web page at www.lesker.com,
} and an extensive catalog is accessible there.   However, your fitting
} is unusual, so a phone call to the company will probably be needed.
} If they don't have that exact fitting, try for an adapter.
} Good Luck,    Tom McCloud
} 
} 
} On 7 Nov 2003 09:49:32 -0800, obirer <[EMAIL PROTECTED]> wrote:
} 
} }Hi All
} }
} }I am looking for the old type of vacuum fitting edwards used to put on
} }its pumps. It is an o-ring seal between a male and a female fittings
} }(1") and it is clamped with 2 C shaped clamps and 2 bolts (or 1 C
} }shaped clamp if connected to the mechanical pump).
} }
} }Does anybody know under what name they are sold or even if they still
} }exist?
} }
} }Thanks
} }
} }Ozgur