Re: need supplier for reel to payout electronic component

Should be able to get through any of the large electronics distributors
(Arrow, Hamilton, Avnet, Wyle, etc.).

"William Danielson" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> Can anyone suggest a supplier for a reel to payout electronic
> components?
>
> I have checked about 10 suppliers I found on THomas Register and
> Google but none of them make on in this strange size. Here is are the
> requirements:
>
> 1. 3.00 in. bore to fit a 3.00 od spindle on a web converting machine
> 2. 18.0 flange od (17 to 24 od would work)
> 3. 16.0 barrel od (12 to 16 od would work, barrel od is the dia at the
> at the bottom of the reel, like when the film runs out)
> 4. 2.50 flange inner width (sometimes called the traverse)
> 5. materials - prefer some kind of plastic, but alum or stainless
> steel would work as well
>
> I only need about 20 of these.
>
> I hope I can find these of the shelf, otherwise I'll get my machinist
> to make them up out of alum or stainless.
>
> Thanks in advance for your help,
>
> Doug Danielson
> Atlanta