Re: Rigid epoxy?

Dear DaveC:

"DaveC" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
>
> > You might try "Sci.polymers" for more responces.
>
> Thanks, I will.
>
> > In order to get a better idea of the rigidity needed, what types of
> > epoxy have you tried that were not acceptible?
>
> Devcon 5-minute epoxy was too soft (what I call too "resin-y"). Devcon is
> what I have available at all the stores, locally. Some 3M stuff is
available
> at outrageous cost at the industrial supply house, but if that's what is
> recommended, I can use that.

Is there a reason why you do not use:
- a "lossy" epoxy with a ground glass filler, or
- cyanoacrylate (super glue)?

Davdi A. Smith