Re: G10R FTA Problems

Thanx will try that...
"kryppy" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> On Tue, 02 Dec 2003 07:53:58 GMT, "Nagra_Sux" <[EMAIL PROTECTED]>
> wrote:
>
> >I am having a hell of a time trying to pickup the TARBS G10R FTA stuff.
I
> >can pick up a nice KU band signal off of that bird but I can't seem to
get a
> >good quality signal to get a good fta reception.  My MSR FTA reciever has
> >two displays for signal.  One is actual signal which is up at 95 and the
> >other display on screen that is called the signal quality is between 10
and
> >29 which was the highest.  When I do get a viewable signal its
intermittent
> >and picture breaks up.  I am using a 10ft dish and a C/Ku corrotor setup.
I
> >have tried jogging the dish back and forth and also tried adjusting the
> >polarity but nothing.  My signal strength meter is pegged when I have the
Ku
> >coax going to it and then to my FTA reciver.   I am using this type of
FTA
> >reciever which I picked up off of eBay (
>
> The only number to watch on the meter is quality. If you are able to
> watch other KU digitals with that LNB, I would suspect you need to
> adjust the polarity a bit. A little goes a long way on DVB signals.
> Adjust it very slowly while watching the quality. When it is highest,
> bump the dish east/west a tiny bit at a time.
>
>
>
>
>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3061682911&category=3284
8
> > ).Any ideas or opinions would be appreciated......Thanx
> >
>