
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
Thanks to you all. You have given me some ideas. 73, Miha "Diverd4777" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > MY SCUBA camera started flooding ; come back up > & see water inside it; > Flash wouldnt work nobbut > > - took it apart, cleaned up the salt water, wiped it down with Fresh Water, > let it dry in the Sun 24 Hrs; > > - Worked Fine. > > > In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > (Soames123) writes: > > >>Some parts will melt if above 212 F or so; > >- Did it drop into SALT water? > >If so, take out the batteries & put it into > >fresh water. Soak it good. > >THEN take it out, open up the case ( Broke anyway !) > >& let it sit in a warm, dry place, with a > >(~) 60 watt light bulb shining on it > >Set a fan right next to it. > >Turn it over every 4 hours. > >Do this for a day.. > > > >Look for signs of moisture. > >Then put in FRESH batteries & try it. > >- Might work !!! >
| <-- __Chronological__ --> | <-- __Thread__ --> |