
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
I wanted to make the edges of the pond natural looking (plants on the edge growing into the water). As for fish stiring things up...I was thinking of going fishless ~ jan JJsPond.us <[EMAIL PROTECTED]> wrote in message news:<[EMAIL PROTECTED]>... > If you don't want to deal with pots, just anchor the plants with a cement > block or rock. Bad bacterias love clay/sand on the bottoms of a pond. The > reason why many of us recommend pots/baskets (even plants anchored by rocks > in the pot/basket) is because these pond plants grow like weeds. To give > you an idea after 3 months my pond looked like it had been there a very > long time. It is much easier to divide a plant out of the water, and in my > case, up on a work table. ~ jan > > See my ponds thru the seasons and/or my filter design: > http://users.owt.com/jjspond/ > > ~Keep 'em Defrosted~ > Tri-Cities, WA Zone 7a > To e-mail see website > > >On 29 Nov 2003 18:34:19 -0800, [EMAIL PROTECTED] (Tracey) wrote: > > >What about using clay/sand in the bottom of the pond over the liner > >and planting pond plants directly in the mud. No pots and lots of > >places for water creatures to live. It would be muddy water after a > >rain, but it should settle back down and be clear...right? I couldn't > >have a lot of water movement or it would never be clear. 1/2 of the > >pond (deep end) could be just liner and the other 1/2 of the pond > >could have clay. This way I could have some filtration and movement > >at the deep end with out stiring up the shallower end too much. Any > >thoughts on this? > > > >Thanks for letting me think out loud > > > >Tracey
| <-- __Chronological__ --> | <-- __Thread__ --> |