Re: thin kerf circular saws

Bob,

    Rather than oven cleaner, I use a piece of 3/16" thick polycarbonate
available as scrap from the local plastics store.  A couple of passes with
the plastic and the blade is as clean as new (when cutting ebony anyway...)

    aloha,

David C. Hurd
www.ukuleles.com
"Bob and Anne Gleason" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> Matt,
>     I use the jewelers sawblades all the time. I've used 5" blades from
MSC
> Industrial for at least 15 years. Basically they last forever and are very
> cheap. I use .023, .025, and .028 blades for various fretting operations.
> After each use I spray them with oven cleaner as the fine teeth clog
> quickly.