Re: TECH: WG K7000

Thanks Ken,

I see that I had C40 in backwards. Apparently the silkscreen is wrong. But
on C42 I'm still not sure. This cap is oriented differently. My question
would be does the minus side face the left-hand side of the board or does it
face the right-hand side of the board. The silkscreen shows that the
positive side should face the right-hand side. This is looking at the board
with the adjustments pointing towards you.

Thanks

"Ken Layton" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> Hmmm.....a 7000 series in an original Centipede cabinet? Must have
> been replaced at one time.
>
> C40 is the large 2200 mfd @ 35 volt electrolytic cap. It goes in with
> the - minus side facing the flyback. C41 is a tiny ceramic disc cap
> and polarity doesn't matter. Sure you don't mean C42 which is a 1000
> mfd @ 16 volt electrolytic? If so, C42 goes in with the - minus side
> facing resistors R90 and R93.