Re: Need help to install a 3DO Blaster

I have only drivers for this CD-ROM for Windows 3.1
I tried them on Windows 95 but they don't want to install.

The CD-ROM is connected to the 3DO Blaster card and it read Data CD and
audio CD without problems in MS-DOS ans Windows 3.1.
I think it doesn't works because there is a problem with the video card.
I know the 3DO Blaster needs a VESA card but I don't know if it works with
an PCI card.
Actually I'm using an ATI RAGE II PCI card and I have no signal at the 3DO
Blaster video out output.


"Mojo JoJo" <[EMAIL PROTECTED]> a écrit dans le message de
news:[EMAIL PROTECTED]
> I'm pretty sure you connect the IDE ribbon cable from the CD-ROM to the
3DO
> Blaster Card and as far as I remember this peripheral only worked in
Windows
> 98.  The CD-ROM drive was the same one I had in my packard bell.  You
might
> need to find the disk that loads the CD-ROM drive since that won't be
> recognized by the bios.  I know so because I tried using the CD-ROM drive
by
> itself without connecting it to the card and just directly connecting it
to
> the motherboard.
>
> Mojo
>
> "I've Got A Loverly Bunch Of Coconuts" <[EMAIL PROTECTED]>
wrote
> in message news:[EMAIL PROTECTED]
> >
> > "The Ultimate Video Game Museum" <[EMAIL PROTECTED]> wrote in message
> > news:[EMAIL PROTECTED]
> > > Hi,
> > >
> > > I need help to install a 3DO Blaster.
> > > I don't know how to plug it.
> > > The CD-ROM doesn't detect a 3DO CD-ROM.
> > >
> > > Topper
> >
> > If I recall, this card only worked with a specific Creative Labs CD-ROM
> > player.  Do you have all the right pieces?
> >
> >
>
>