Re: SpeedSeal Water Pump Cover

Yup - i put one on my yanmar 2gm20f - they helped me pick the right size -
shipped right away - it works great.

-- 


Please note - My ATT email adress has changed.  The new address is:

[EMAIL PROTECTED]

If for any reason that bounces, please feel free to use:

[EMAIL PROTECTED]
"Doug Dotson" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> That is correct. The lower two screws are just loosened and the upper
> two are removed. Then the plate just lifts up and off. I didn't have this
> system on my Yanmar (3GM30F) and never changed an impeller on it
> so I can't comment on that part. Its got to be better than trying to use a
> screwdriver or nutdriver around a blind corner though.
>
> Doug
> s/v Callista
>
> "Hmseconomy" <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]
> > << Especialy good on the Yanmar reverse facing pumps. Can replace the
> > impeller by feel. >><BR><BR>
> >
> > I've got the Yanmar 2GM20F with the waterpump facing aft.  It would
appear
> that
> > this model for require the SpeedSeal with four thumbscrews.  Is that
> correct?
> > If so, it also seems that two of the four would remain in place as you
> slide
> > the cover into their slots and then put in the last two thumbscrews.
How
> > difficult is that to do by feel as you would not be able to see the
screw
> > holes?
>
>