
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
On 01 Dec 2003 15:58:29 GMT, [EMAIL PROTECTED] (Teacherjh) wrote: > KPHL, On departure, there is no conveinent place to do a runup (once you're in > the taxiway system), so ask first where to do it so you don't block traffic. I > didn't know this and expected to do a runup at the departure end of the runway. > Well, it was tight, and a few bizjets squeaked by while I was doing it; this > was clearly not the preferred method. Aha, this is just the situation that calls for a "rolling runup." Do it on the (long) taxiway toward the takeoff runway. Everything is the same, except you use the brakes to keep at normal taxi speed, rather than use the brakes to stay stationary. Yes, it does wear the brakes a bit, but not more than a short field landing will. A very useful trick that my CFI taught me many years ago, and I've found several occasions (at big-iron airports) where it really saves time and confusion. At an unfamiliar towered airport, you can also ask GND if there is a runup area at/near the threshold hold point. If not, then do it on the roll. > > Jose
| <-- __Chronological__ --> | <-- __Thread__ --> |