Re: 2nd Gen Wiper Switch

Thanks. I ordered a G6B-2114P-US-DC12 from Digikey. I may not fix it until
warmer weather because I have a front-wheel-drive car for winter. We'll see
how it goes.

Chris

"Chuck_Sterling" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
>
>
> Chris wrote:
> > I've seen several solutions to a failing 2nd Gen RX-7 wiper switch. I
> > already cleaned the contacts in mine once and am considering replacing
the
> > relay. Someone listed an Omron relay Part # G6B-2114P-US-DC12 that is
> > supposed to work. How successful has this been? It's only a 5A relay.
Any
> > suggestions are welcome.
> >
> >
>
> That number requires that you spread the wires a bit to reach the pads,
> but the wires are long enough to reach the solder side. A better choice
> is G6C-2114P-US-DC12V, which fits correctly. I used the "B" version
> about 8 or 10 years ago and it has held up so far. I bought mine from
> Digikey; as I recall they had a minimum purchase at the time of $20 or
> so. The relays were something like $6 each.
>
> Chuck Sterling
>