Re: How do you adjust valves

"Weedahoe" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> Does anyone know what the proper procedure is for adjusting valves on a
set
> of heads? I have heard two different ways. One by doing each valve at a
time
> and the other is by getting the piston to TDC and then setting the valves
by
> getting zero lash and then preload. Does anyone know which is correct or
the
> better procedure?
>
>

Either way works. I prefer to start at the front of the engine and set the
exhaust valve when the intake is closing, and set the intake valve when the
exhaust is opening. It really is a matter of preference for the person doing
the job.

Chris