
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
"JazzyB!" <jazzybjazzy DONTWANTANY @hotmail.com> wrote in message news:[EMAIL PROTECTED] > Here's the skinny: > > I setup my Eheim Ecco 2231 canister filter last night and it was running > quite well. As a pre-caution I put the filter in a bucket... just in case. > Well... I awoke this morning to discover the "just in case". The bucket had > over a litre of water in it. > > It doesn't appear that the water dripped from the tubing or where the tubing > is connected to the joints, though it could've happened. I've stopped the > filter and pulled it apart just to inspect (the DIY in me) and see if > everything seemed kosher. Everything seemed okay so I'm about to empty the > bucket and run the filter again... in the bucket :). > > Does anyone have any ideas as to what could've caused this water to appear > in the bucket? Does anyone here own an Ecco? > > This filter needs to be up and running ASAP so I'd greatly appreciate your > prompt responses. As with any cannister if you don't get the seal quite right on the lid the thing can/will leak. Chances are that by pulling it apart & putting it back together you've solved the problem. Only other thing is that if it is a brand new filter, did you grease the seal? I.
| <-- __Chronological__ --> | <-- __Thread__ --> |