Re: Tank cushion?

Oops...guess I'll polyurethane the snot out of it.


"Charles Spitzer" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
you're going to regret that mdf the first time it gets wet.

damhikt

"Dan Norgard" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> I agree, so I built a stand of 6 4x4 legs under a 2x6 frame with 2x6
> 'joists' on 12" centers.  the top is a 24"x63" sheet of 1/2" MDF screwed
to
> the frame with another sheet glued to it's top (all joints are glued and
> screwed).  Although this gives a truly flat and smooth finish I am adding
> 1/4" of laminate flooring underlayment (foam pad).
> Dan
>
> "critcher" <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]
> I would think that a tank loaded on its side panels would be far more
liable
> to a rupture of the sealing compound under shear stress than a tank with
the
> UK design i.e. flat bottom glass supporting sides and ends and laid on a
> flat support with carpet or other pad to even out any imperfections.
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.537 / Virus Database: 332 - Release Date: 06/11/2003
>
>
>