
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
If your filter is just set up it may not be 100% filled with water ? I have this in my canister filter usually after a couple of hours it stops. Where is the CO2 diffuser connected to ? Do you might have an air stone that bubbles into the intake of the filter ? Did you try shutting it off for a couple of hours ? gizmo "Simon" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > I need help. > > I just set up a 20G planted tank (60 cm), including an Eheim 2222 canister > filter, compressed CO2, and a Fluval surface skimmer. I have to put the > Eheim filter on the same bench as the tank because of space problem. The top > of the filter is about 15 cm below the water level of the tank. I notice the > filter rumbles and pumps out about 5-10 cc of gas every 15-30 min. I have no > idea when the gas is from. It can be the CO2 or the air drawn in through the > surface skimmer. I have reduced the inflow from the water surface to reduce > the air sucked in this way. However, this does not seem to reduce the amount > of gas pumps out through the outflow. Today, the filter developed an airlock > with noisy impeller and no outflow, requiring repriming of the filter. > > I wonder if anyone has similar experience or can advise me how to overcome > the problem. > > Many thanks in advance. > >
| <-- __Chronological__ --> | <-- __Thread__ --> |