www.Usenet.com
www.Usenet.com
| <-- __Chronological__ --> | <-- __Thread__ --> |
Archive-name: apple2/faq/part1
Posting-Frequency: monthly
Last-modified: 2003/10/1
URL: http://home.swbell.net/rubywand/A2FAQs1START.html
Apple II Frequently Asked Questions: Main Hall 1 ... Start Here!
Csa2 FAQs-on-Ground ref: Csa21MAIN1.txt rev067 October 2003
The Csa2 (comp.sys.apple2) Usenet newsgroup Apple II FAQs and Resource
files originate from the Ground Apple II archive, 1997-2003.
Ground Apple II Administrator: Steve Nelson
ftp://ground.ecn.uiowa.edu/apple2/Faqs/
ftp://ground.ecn.uiowa.edu/apple2/Faqs/Formatted/
Note: FAQs files in the main folder on Ground are pure Text files
which have no Font, Color, etc. formatting and no set line length.
This makes them ideal for printing out or for viewing via an ftp
client which places the content in a text viewer such as WordPad.
Text in the "Formatted" folder is line-length formatted for
convenient on-line perusing via Netscape, etc..
Mirrors- GS WorldView (formatted Text) also maintains copies
of the FAQs Resource files.
http://apple2.org.za/gswv/a2zine/faqs/
Text and HTML-ized Text versions are maintained by FAQs mirrors
around the world-- ref. the news.answers pure Text MIT archive.
ftp://rtfm.mit.edu/pub/usenet/comp.sys.apple2/
Note: To correctly view tables and diagrams in Text files, use
a fixed spacing Font such as CoPilot or PCMononspaced (IIgs)
or Roman 12cpi (PC).
The HTML version of the FAQs is maintained on the II Computing site.
http://home.swbell.net/rubywand/A2FAQs1START.html
____________________________
Csa2 Apple II FAQs Main Hall
Revision 067 Update: 1 October 2003
Welcome to the comp.sys.apple2 newsgroup Frequently Asked Questions! This file is
called "Main Hall" because it's your starting-off point for accessing the Apple II
FAQs.
You can peruse a listing of all FAQs questions in Main Hall-2; OR, you can check
out some 'getting started' and 'what's where?' Questions & Answers here.
There have been several revisions since the September 1, 2003 release. Besides
some updates to site listings, these include changes to the Games FAQs.
Thanks to those who have suggested modifications and posted answers or sent
contributions which have been incorporated.
Best wishes to all Apple II users!
Jeff Hurlburt, 1 October 2003
[EMAIL PROTECTED]
General Apple II and Getting Started Q&A
001- What is a FAQ?
002- What is comp.sys.apple2 and how can I read/post messages there?
003- What software do I need to get started and how do I get it?
004- How and where do I download and upload Apple II files?
005- Where can I get Apple II information, software, books, and parts?
006- What is an Apple II: The KIM
007- What is an Apple II: The Apple I
008- What is an Apple II: The Apple ][ and Apple ][+
009- What is an Apple II: The "Black Apple"
010- What is an Apple II: The Apple //e
011- What is an Apple II: The Apple //c and IIc+
012- What is an Apple II: The Laser 128EX and 'EX/2
013- What is an Apple II: The Apple IIgs
014- What is an Apple II: The Apple IIe Emulation Card
015- What is an Apple II: The Trackstar Apple II Emulation Card
016- What is an Apple II: Emulators
017- Apple "][", "Apple II", "Apple //"-- which is correct?
018- What is "8 bit" and "16 bit"?
019- How can I tell what version my computer is?
020- Suppose I just want to start using my Apple II Now!?
021- Where do I find out about Apple II users' groups?
022- How can I find out more about using and programming my Apple II?
001- What is a FAQ?
A "FAQ" is a "Frequently Asked Question". The Csa2 FAQs is a collection of topics
files and resource files which seeks to supply answers to questions about the Apple II
series of computers and Apple II computing. --Rubywand
____________________________
002- What is comp.sys.apple2 and how can I read/post messages there?
Comp.sys.apple2 (Csa2) is a USENET newsgroup. Messages posted to these newsgroups
spread to many thousands of servers and millions of readers throughout the world.
Most Internet Service Providers support posting and reading newsgroup messages
via popular browsers like Netscape and Internet Explorer. A few internet sites also
provide free access to newsgroups and allow posting messages. Two are Google and
Mailgate. Google also allows searching for information in an archive of newsgroup
messages which goes back to 1981. (For links see Q&A 001 in MAINHALL4.txt.)
There are several newsgroups in the Csa2 and related families, all concerned with
Apple II series affairs. They provide a forum for users to compare notes, ask
questions, and share insights.
comp.sys.apple2 (Csa2) - Discussion plus questions & answers
relating to all Apple II computers
comp.sys.apple2.comm - Communications and networking related
issues
comp.sys.apple2.gno - Discussion of GNO/ME, a UNIX-like
multi-tasking environment for IIgs
comp.sys.apple2.marketplace - Buying, selling, and promoting
Apple II and related products
comp.sys.apple2.programmer - Discussion relating to any aspect of
programming the Apple II
comp.sys.apple2.usergroups - Discussion relating to Apple II
usergroups
comp.binaries.apple2 - Public Domain software, shareware, and
freeware for Apple II's in Text-encoded
(binscii) form.
comp.emulators.apple2 - The unofficial 'Apple II games stuff'
newsgroup features discussions of
Apple II games as well as of Apple II
emulation on PC, Mac, and other
platforms.
comp.sources.apple2 - A newsgroup for the posting of Apple II
source code
alt.emulators.ibmpc.apple2 - Discussion about the use of Apple II
emulation software/hardware on a PC.
--David Kopper, Dan DeMaggio, David Empson, Al Kalal, Rubywand
____________________________
003- I'm an Apple II beginner. What software does a newbie need
to get started and how do I get it?
If you bought an Apple II with no software at all, then, at the very least, you
will need to get diskettes which boot DOS 3.3 and ProDOS (which pretty well means you
need to have a disk drive). Here is a listing of basic stuff to get ...
o- DOS 3.3: DOS 3.3 is an old but a good operating system for software on 5.25"
diskette. There is a _lot_ of Apple II software on DOS 3.3 diskettes. To write and
save programs, etc. under DOS 3.3 you want a disk which boots DOS 3.3 and lets you get
to a BASIC prompt. Once in BASIC after booting DOS you will be able to CATALOG the
diskette, and LOAD, RUN, SAVE, ... programs. DOS 3.3 commands are described in more
detail in the Csa2DOSMM Q&A.
Commercial game disks often do not allow you to get to a BASIC prompt. Disks with
programs from other users, software from Apple user groups, and copies of Apple's
System Master disks will, usually, let you get to BASIC either by exiting a program or
by doing a Reset. (See Q&A 020 below for more about this.)
o- ProDOS: Practically all of the above applies to ProDOS. ProDOS is the newer Apple
II DOS which allows having sub-directories. It works with 5.25" and 3.5" diskettes as
well as hard disks and other large media. (See Csa2DOSMM Q&A for more about ProDOS.)
Note: Diskettes used with an Apple II should be double-density (DD) diskettes.
High-density (HD) diskettes sold for PC's will not work reliably in Apple II disk
drives.
o- Copy II Plus: This is the standard general purpose disk/file management utility.
Good versions for working with both DOS 3.3 and ProDOS disks are Version 7.1 and 7.2.
o- A telecom utility: an Apple II telecom utility (e.g. ZLink, ProTerm, ...) together
with a serial interface board (or built-in serial port) lets you transfer the Apple II
files you download on the net from your PC or Mac to your Apple II.
o- ShrinkIt: Most Apple II files are maintained on the net as shrinked files (.shk
files) or on shrinked disks (.sdk files). ShrinkIt v3.4 is the standard utility for
unshrinking these files; it requires a 128k Apple IIe or later Apple II. Earlier
versions of ShrinkIt work on Apple II's with less than 128k memory.
Aside from Apple II user friends, there are many places you can get the above, as
well as all sorts of other Apple II utility, game, etc. software:
1. Apple II Users' Groups maintain software libraries of utility and games diskettes
you can copy. (See Csa2USERGRP.txt.)
2. Some schools and universities have Apple II areas where you can copy system and
utility diskettes.
3. Many sellers of original and second-hand software advertise on the
comp.sys.apple2.marketplace newsgroup and/or maintain web sites you can browse. Be
sure to check the listing of vendors presented later on.
4. If requested via email, regular posters to Csa2 will often send one or more
'getting started' diskettes which will boot DOS 3.3 and/or ProDOS and which include
some copy, telecom, etc. utilities plus games. (Expect to pay mailing and materials
costs.)
5. The Apple II archive sites listed below maintain large collections of software
which you can download via PC or Mac and transfer to your Apple II.
--Rubywand
____________________________
004- How and where do I download and upload Apple II files?
How: By far, the easiest and quickest way is to access software sites on the net
using a PC or Mac. Files can be moved to and from your Apple II via a NULL-modem
connection with the net computer. If you use a Mac, you may have the option of
transferring the files via a ProDOS or HFS diskette or an HFS Zip disk. (For details
on hardware, file transfes, downloading, and uploading, see the Telecom-1 and
Telecom-2 Q&A.)
Where: Today, most users upload software, info files, etc. to one or more of the
major Apple II ftp software archive sites. Other options include comp.binaries.apple2
and BBS systems. The software archive sites are good places from which to download
software. In addition, some software vendors, developers, and Apple Computer make
software available for download at their sites.
--Rubywand
____________________________
005- Where can I get Apple II information, software, books,
magazines, and hardware?
A good place to look is Csa21MAIN3.txt ("Main Hall-3: Apple II Web Sites") ...
For places to buy systems, parts, boards, and software, see Q&A 005.
Or, see http://home.swbell.net/rubywand/A2FAQs3VENDORS.html
For places to get books and periodicals, see Q&A 006.
Or, see http://home.swbell.net/rubywand/A2FAQs3VENDORS.html#021
For places to get Apple II information and software on the net, see general and/or
game-specific Q&A.
Or, see http://home.swbell.net/rubywand/A2FAQs4MAJORSITES.html
or http://home.swbell.net/rubywand/A2FAQs7GAMESITES.html
If you are looking for a specific piece of utility or system software, check
Csa21MAIN4.txt ("Main Hall-4: Get It- Links to popular software packages") ...
For links to File handling utilities, see Q&A 001.
Or, see http://home.swbell.net/rubywand/Csa2FLUTILS.html
For links to Telecom wares, see Q&A 002.
Or, see http://home.swbell.net/rubywand/Csa2T1TCOM.html
For links to System software, see Q&A 003.
Or, see http://home.swbell.net/rubywand/Csa2DOSMM.html
or http://home.swbell.net/rubywand/Csa2APPLICS.html
or http://home.swbell.net/rubywand/csa2pfaq.html
For links to specific emulator packages, check Csa2APPLICS.txt ("Applications")
Q&A 003; or, see http://home.swbell.net/rubywand/Csa2APPLICS.html#003 .
--Rubywand
____________________________
006- What is an Apple II: KIM and SYM
My Ex bought a KIM in ... had to be 1976, 'cause that's the year we
split. He played Hunt the Wumpus on it. I couldn't see the point of
messing with those red LEDs at the time.
Nancy Crawford, Csa2 post on 27 December, 1995
KIM (for "Keyboard Input Monitor") was a 6502 'development system' release in
1976 by MOS Technology. A single board with six 7-segment LED displays, it soon had a
wide following of avid experimenters who wrote programs like Jim Butterfield's "Lunar
Lander" and Stan Ockers's "Hunt the Wumpus" and published numerous articles in
magazines like Byte and KiloBaud describing hardware add-ons.
Another 6502 based board was SYM from Synertek Systems. It arrived two years
after KIM near the end of the 'computer experimenter' era. SYM offered a speaker and
more extensive interfacing capability, including support for a CRT display.
KIM and, to a lesser extent, SYM, were the introductions to 6502 computing which
would, in a few years, lead many to become Apple II users. -- Rubywand and Tim Aaronson
____________________________
Related FAQs Resources: R010APPLE1.GIF (gif picture file)
007- What is an Apple II: The Apple 1
The original Apple was not much more than a board. You had to supply your own
keyboard, monitor and case. It sold for $666.66, but now they are worth much more as a
collector's item.
For Apple 1 pics and more information, ...
Applefritter Apple 1 Owners Club
http://www.applefritter.com/apple1/index.html
Dr. Tom's Apple 1 pics and info
http://www.apple2.net/gswv/gsezine/GS.WorldView/@APPLE.HISTORY/
Faqs Resource File R010APPLE1.GIF at ...
ftp://ground.ecn.uiowa.edu/apple2/Faqs/R010APPLE1.GIF
--Dan DeMaggio, Charles T. Turley
____________________________
008- What is an Apple II: The Apple ][ and Apple ][+
The II and II+ are the computers that launched the Apple II line. They have the
6502 microprocessor, ability to do Hi-res and Lo-res color graphics, sound, joystick
input, and casette tape I/O. They have a total of eight expansion Slots for adding
peripherials such as the Disk ][ controller, MockingBoard, serial I/O, and printer
interface. Clock speed is 1MHz and, with Apple's Language Card installed, standard
memory size is 64kB.
The distinction between the ][ and ][+ is the installed ROMs. The ][ starts you
in the Monitor program and includes in-ROM Integer BASIC. The ][+ has the AutoStart
ROM which tries to locate and boot a diskette upon startup and defaults to Applesoft
BASIC which is included in-ROM. Many ][ owners upgraded to the ][+ ROMs.
Apple ][ and ][+ computers can run thousands of games, utilities, and other
programs created to run under Apple DOS-- chiefly, DOS 3.3. Both machines can, also,
run under ProDOS through v1.9 so long as the software does not require features of an
"enhanced" 128k IIe. For instance, you can run Appleworks if you have more than 128K
RAM installed and a program called PlusWorks. However, the ][ can not run BASIC
programs under ProDOS since Applesoft must be in ROM.
Recommended configuration: 16K "language card" (in Slot 0), an 80-column video card
(not the same as a //e Extended 80-column card), shift key modification (a wire
running from shift key to game port), modified character ROMs to display lower case,
composite color monitor, Disk ][ controller card, two 5.25" Disk ][ or compatible
drives, parallel printer interface card, and parallell-interface printer. You can add
memory beyond 64k in various ways, but many programs that "require 128K" probably will
not wor
k, no matter how much RAM you have. You can also add accelerators like the SpeeDemon
or Rocket/Zip. --Dan DeMaggio, David Empson, Rubywand
____________________________
009- What is an Apple II: The "Black Apple"
Bell & Howell marketed the "Black Apple" made by Apple. It is an Apple II+ done
in black with some extra audio/video connections to fit with projectors, etc. made by
B&H-- mainly for use in the classroom. A nice feature is the "handle" attached to the
back. It contains a few power outlets, allowing the CPU, Monitor, etc., to be
controlled with one switch. Evidently, 5000-10,000 units were produced. --Coaxial,
Mike McGovern, Rubywand
____________________________
010- What is an Apple II: The Apple //e
The //e comes in two flavors: Enhanced and unenhanced. When you start your
computer, the unenhanced IIe displays "Apple ][" at the top of screen; the Enhanced
IIe displays "Apple //e". Apple made an Enhancement kit to upgrade an unenhanced to
Enhanced by replacing 4 chips (CPU [65C02], Video ROM [MouseText], and new
Monitor/Applesoft ROMs). Apple Resource Center sells a IIe Enhancement kit for $20.00.
The current IIe operating system is ProDOS-8. (The IIe can also run DOS 3.3,
earlier DOS's, and Pascal.) A lot of ProDOS software requires an Enhanced //e, and
sometimes 128K, too.
A IIe Enhancement Kit does not include any extra RAM. You can expand a 64k IIe to
the standard 128k required for a fully Enhanced IIe via an Extended 80-column card. It
plugs into the Aux Connector on the motherboard. Alltech ($19.00), and MC Price
Breakers ($14.95) sell such cards.
Except for being able to type and display lower-case characters, the unenhanced
IIe is very similar to the II+. A 128k Enhanced IIe adds a number of features
including 80-column firmware and 16-color double-lores and double hires display
capability.
The Apple //e remains useful for four major reasons:
1) It runs AppleWorks, a simple to use, yet sophisticated Spreadsheet/Word
Processor/Database.
2) It can run many games and other entertainment software products.
3) There are many Apples in schools-- an example is Louis Cornelio's room at
Clairemont High School ( http://www.n2.net/clairemont/ )-- so there is a ton of Apple
II educational software.
4) It is was and will always be a _Personal_ computer. You can learn as little or as
much as you want, and nothing stops you from learning about every nook and cranny in
it. Ask any big name programmer in MS/DOS or Mac where they learned to program. Most
of them taught themselves on a good ol' Apple II.
Recommended configuration: Extended 80 Column card (gives you 128K) or RamWorks (512K
to 1MB RAM), Enhancement kit (for unenhanced IIe), and a composite color monitor which
can display decent 80-colume text, Super Serial card, Disk ][ controller card, two
5.25" Disk ][ or compatible drives, parallel printer interface card, and
parallell-interface printer. A Hard Drive is recommended if you use a lot of different
programs. Heavy Appleworks users should add the hard disk, extra RAM, and a 4MHz or
better acce
lerator (like the Rocket Chip, Zip Chip or TransWarp). --Dan DeMaggio, Rubywand
____________________________
011- What is an Apple II: The Apple //c and IIc+
The //c and IIc+ are compact 'luggable' versions of an Enhanced //e, with many
built-in 'cards'. Included are 2 serial ports, a mouse port, a disk port and 128K of
RAM. Support for the original Apple casette tape I/O is gone. The //c has a built-in
5.25" drive while the IIc+ has a built-in 3.5" drive.
The IIc+ has a built-in accelerator that runs at 4 MHz (vs. the //c's 1MHz)
making it the fastest Apple II as well as faster than any of the A2 clones. (To boot
your IIc+ at 'regular', 1MHz, speed, include the Escape key in the usual boot
keypresses-- i.e. OpenApple-CTRL-ESC-RESET.) The IIc+, which was introduced after the
IIgs, also allows daisey chaining the GS Apple 3.5" drive along with 5.25" drives.
The //c and IIc+ run just about all of the DOS 3.3, ProDOS, "128k" software, etc.
that an Enhanced //e runs plus the few //c-only software releases. However, the use of
certain locations for storing system variables and ROM differences means that //c
series machines will not run a number of old games designed for the ][ and ][+ which
the IIe and IIgs will run.
Even though //c machines don't have slots, you can still add extra memory
(there's room under the keyboard) and a hard drive (through the disk port--a bit slow
by ordinary standards, but usable. Hard to find though.. Was made by Chinook). There
is also a for-//c "D" version of MockingBoard you can plug in to get much improved
sound and music from software supporting the board, and a module you can attach to
convert output to RF for using a TV as a monitor.
Recommended configuration: A composite color monitor which can display decent
80-colume text, 1 MB RAM, and, maybe, a hard drive. For the //c, add a second 5.25"
drive; for the IIc+, add a second 3.5" drive and two 5.25" drives. --Dan DeMaggio,
Rubywand
____________________________
012- What is an Apple II: The Laser 128EX and 'EX/2
While not made by Apple, these Lasers can run just about anything that an
Enhanced //e can run. They are as luggable as a //c and include built-in 'cards'. They
are also fast; the entire motherboard runs at 3.6Mhz. If you want to use a card in the
single expansion Slot, you may have to disable the internal UDC (for 3.5" drives) or
the internal 1MB memory expansion.
Unlike the EX model, which supports one additional disk drive, the EX/2 supports
as many daisychained drives as a IIgs and has a built in BRAM control panel for saving
settings. The EX/2 also has a built in 3.5" disk drive, a MIDI port, and a video port
which can support analog RGB and digital CGA monitors as well as an LCD display.
--Supertimer, Dan DeMaggio
____________________________
Related FAQs Resources: R024GSSPECS.txt (text file)
Related FAQs Resources: R002WOZGS.GIF (gif picture file)
013- What is an Apple II: The Apple IIgs
The IIgs (or "GS") represents a giant leap in the Apple II line. It's 65C816
microprocessor can switch to 6502-emulation mode for running 8-bit Apple II software
favorites, while, in native mode, it runs 16-bit GS applications. GS delivers new
super-hires graphics modes, a toolbox in ROM, a 32-oscillator Ensoniq sound chip, and
a max base speed of 2.8MHz. Base RAM memory is 256kB (ROM-01) or 1MB (ROM 3)
expandable up to 8MB.
GS built-ins include modem and printer serial ports good for up to 230k baud,
Disk Port supporting two 5.25" and two 3.5" (800k) drives, RGB and composite video
outputs, enhanced and 'old Apple' sound, ADB bus for keyboard and mouse, game port
supporting two two-button joysticks, clock/calendar, and battery RAM to retain user
settings accessible via the Control Panel. (To get to the Control Panel press
OpenApple-Control-Escape and select "Control Panel".) There is more about Apple IIgs
specifications
in the FAQs resource file R024GSSPECS.txt.
The IIgs can run DOS 3.3, ProDOS, Pascal, and any other OS the earlier 8- bit
models can run. In 8-bit or "emulation" mode, it works much like an enhanced //e, even
down to supporting nearly all of the old monitor routines and softswitches. One
notable difference is that users must go to 64k Bank $FF (e.g. FF/F800 - FF/FFFF) to
view monitor ROM contents. In the default (Bank $00) area, an F800L etc. monitor
command shows code in the "Language Card" RAM. Like the //c series, it does not
support the ori
ginal Apple casette tape I/O.
GS is the only A2 machine which can run GS/OS. GS/OS and Toolbox routines make it
possible for the System Finder program to deliver a sophisticated 'mouse and windows'
environment which looks very much like PC's Windows. The current version of System is
System 6.0.1.
The first GS's were released in the Fall of 1986. The batches produced until
mid-late 1987 became known as "ROM 00" machines after release of the "ROM 01" models.
When you turn ON or force restart a ROM-01 GS, the startup screen shows "ROM Version
01"; on a ROM-00 GS the startup screen says nothing about ROM version. (Press
OpenApple-Control-Reset to do a forced restart.)
The original GS's came in cases marked "Limited Edition" with Steve Wozniak's
signature. Often, these are referred to as "Woz GS's". (See FAQs resource file
R002WOZGS.GIF for a picture.) Only about 50,000 ROM-00 IIgs's had the "Woz" signature.
A relatively small number of users chose Apple's option to upgrade their //e's with a
motherboard swap. Introduced in early 1987, the upgrade included "IIgs" labels which
users could substitute for "//e" in the case insert.
At the time of the ROM-01 change-over in 1987, Apple supplied a ROM-00- to-ROM-01
upgrade service free. It consists of swapping in a new ROM and a new Video Graphics
Controller ("VGC") IC. ROM-00 machines which have not had the upgrade can not run
modern GS software-- the ROM must be upgraded. Alltech (760-724-2404;
http://allelec.com ) is a good place to check for a ROM-01 'upgrade kit' consisting of
the 01 ROM. (Price: around $30.00)
The VGC upgrade is not required for software compatibility, and is not needed for
all machines anyway. It is supposed to fix cosmetic problems in monochrome
double-hires graphics mode (pink flickering or fringing on what is supposed to be a
black and white screen). On some machines the VGC swap also fixes some color
combination problems in 80-column text mode.
Note: ROM-00 machines can boot disks which start System up through Version 3. (Booting
these disks typically starts by displaying some version of "ProDOS 16".) The downside,
of course, is being unable to boot modern versions of System and use software which
needs to run under the later versions. On the other hand, a number of very early
products run under versions of System which have no patches for ROM-01 or ROM 3.
Original diskettes for these products will boot correctly only on a ROM-00 GS.
Whether via the upgrade or original purchase of a newer GS, by late 1987 nearly
all GS users were 'on the same page'. That is, we had the ROM-01 platform with its
base 256kB RAM plus the official Apple 1MB Expansion Memory Board plugged into the
Memory Expansion Slot for a total of 1.25MB of fully- accessible system RAM. For the
next couple of years, practically all GS software was designed to launch from 3.5"
diskette under "ProDOS-16" and to fit within the 1.25MB of RAM everyone was assumed to
have
installed.
In 1989 Apple introduced the "ROM 3" GS-- the startup screen shows "ROM Version
3". (No ROM-02 GS was ever released). The only major improvement over ROM-01 is more
base RAM-- you get 1MB instead of 256kB. This is a very nice benefit. It means that a
ROM 3 with a 4MB Mem Exp Board will have 5MB of fully accessible RAM whereas a ROM-01
can have 4.25MB of fully-accessible RAM. In effect, the ROM 3 owner gets a 'free'
800kB RAM disk.
As Mitch Spector notes in his listing of ROM 3 features (in the "Hardware
Hacking" FAQs), the newer GS offers a number of other nice pluses with the only
significant minus being incompatibility with a few older GS programs and pre-System 5
versions of GS System. Chiefly, ROM 3 is a 1989 re- do of ROM-01 featuring more
streamlined hardware and more built-in firmware.
Since System 5, booting GS System applies in-RAM patches matched to ROM version 1
or 3. The patches, located in System/System.Setup/, are TS2 for ROM- 01 and TS3 for
ROM 3. This achieves nearly identical operation.
Very few ROM-01 owners felt any urge to move to ROM 3. Even today, the vast
majority of installed GS's are ROM-01 machines.
The 1990's saw wide adoption of four major GS enhancements:
OS- After years of foot-dragging, Apple finally produced a decent 16-bit GS operating
system with release of System 5.0. Within a few years this evolved into today's System
6 (System 6.0.1). System 6 has won wide acceptance as a relatively stable OS which, at
last, allows GS users to access many of the features of GS computing promised back in
1986. Although any ROM-01 or ROM 3 IIgs with at least the 1MB Apple Expansion Memory
card installed can boot a fairly decent install of System 6 from diskette, the f
act that it is likely to use at least 800kB of RAM somewhat limits the applications
which can be run, especially on the ROM-01 GS.
Memory- Driven, in part, by the need for more memory to run System 6, 4MB became the
standard size of installed Memory Expansions. Except for school GS's and GS's taken
out of circulation and tucked away in closets, the old Apple 1MB Expansion Boards have
long ago been replaced with boards adding 4MB- 8MB.
Hard Disk- As with memory, the size of newer versions of System supplied a strong push
toward adding a hard disk. Software was becoming larger, too, and there was so much of
it that making everything work from diskette became impossibly cumbersome. Lower HD
prices, attractive SCSI interfaces such as RamFAST, and low-cost, easy single-card IDE
solutions such as the Focus "Hard Card" and SHH Systeme "Turbo" cards have helped make
the hard disk a standard, expected peripheral on today's GS.
Acceleration- Few commercial software offerings actually sought to push GS users to
higher speeds; and, as a result, users went for years feeling no great need for
Applied Engineering's expensive Transwarp accelerator. The arrival of Zip Technology's
lower-cost ZipGS board together with a clear need for more speed to handle System 6
sparked a nearly overnight 'acceleration revolution'. Today, an accelerator running at
8MHz or better is considered, very nearly, to be a necessary IIgs enhancement.
Recommended configuration: ROM-01 or ROM 3 with 4MB or 8MB Memory Expansion board--
i.e. at least 4.25MB (ROM-01) or 5MB (ROM 3) of total system RAM, RamFAST SCSI + 120MB
or larger SCSI hard disk OR 120MB or larger HD-on-a-card IDE drive (e.g. Alltech's
Focus Hard Card or SHH's Turbo IDE series) with System 6.0.1 installed, 8MHz/32k
TransWarp or 9MHz/32k ZipGS or better accelerator board, Stereo Card, Imagewriter II
printer, two 3.5" and two 5.25" diskette drives.
A minimum GS system that will run many older wares and still deliver a decent
operating system is a ROM-01 GS with the Apple 1MB Memory Expansion board, two 3.5"
drives, at least one 5.25" drive, and Imagewriter II printer, which boots System
5.0.4 or System 6.0.1 from 3.5" diskette. --Dan DeMaggio, Rubywand, David Empson,
Supertimer, Randy Shackelford, Hal Bouma
____________________________
Related FAQs Resources: R028LCA2CARD.TXT (text file)
014- What is an Apple II: The Apple IIe Emulation Card
This is a '//e on a card' plug-in which lets you run Apple II software. The card
fits into Mac LC and some subsequent machines that have the LC Processor Direct Slot
(PDS) and which support 24-bit memory addressing.
Many of these cards are sold today without documentation. In case you've just
plugged one into your Mac Color Classic, etc., it will help to know that pressing
Command-Control-Escape gets you to the Preferences panel.
The Apple IIe Emulation Card is actually more like a //c because the card is not
an expandable machine like a //e. There is a place on the back of the card to plug in
a Y-cable to which you can attach a Unidisk 3.5" disk drive (white, A2M2053) and/or an
Apple 5.25" disk drive (platinum, A9M0107) and a joystick.
Because the graphics are handled by the Mac, animation may be slow if you don't
have a decent Mac. For more information, see FAQs resource file R028LCA2CARD.TXT.
--Dan DeMaggio, David Empson, Owen Aaland, Edward Floden, Liam Busey, Phil Beesley,
Joan Sander
____________________________
Related FAQs Resources: R022TRKSTAR.TXT (text file)
015- What is an Apple II: The Trackstar Apple II Emulation Card
A TrackStar is a single board Apple 2 computer that plugs into a PC Clone with at
least one ISA slot or into an IBM PS/2 computer. The most advanced models, Trackstar E
and Trackstar Plus, work like an enhanced 128k //e.
Trackstar can run Apple II software from virtual "trackstore" disk images,
virtual hard disk, and, with Apple II disk drive plugged, Apple II diskettes. (With
the correct cables, it can use some Apple II diskettes in compatible PC 5.25" drives.)
For more about Trackstar boards, software, and setup, see FAQs Resource file
R022TRKSTAR.TXT.) --Bill Whitson, Michael Kelsey, Mike "Moose" O'Malley, Rubywand,
Wayne Stewart
____________________________
016- What is an Apple II: Emulators
An Apple II emulator-- also called an "emu"-- is a program which lets a PC, Mac,
etc. work like an Apple II and run Apple II software. Usually, the Apple II software
is in the form of a "disk image" file-- a kind of virtual diskette. For more about
Apple II emulators and where to get them see Q&A 003 in Csa2APPLICS. --Rubywand
____________________________
017- Apple "][", "Apple II", "Apple //"-- which is correct?
"][", "II", and "//" tend to be used pretty much interchangably for any model of
Apple II computer, although, practically speaking, there are a few usages which may
provoke a correction.
"][" is the original Apple II symbol. It appears on all early II's and II+'s as
well as on the Disk ][ drive. It is, easily, the most attractive and distinctive II
symbol; but, it is also associated with _old_ Apple II 's. The "//" usage is
associated with the c and newer e models.
"II" is widely accepted as 'okay' for all Apple II models. (And "II" and "A2" are
commonly used for referring to series-wide products, etc. as in "II software", "A2
programmers", ... .)
The generally preferred machine designations are ...
Apple ][ or Apple II for pre-II+ models
Apple ][+ or Apple II+
Apple IIe for non-enhanced IIe computers
Apple //e for 128k enhanced //e computers
Apple //c
Apple IIc+
Apple IIgs or GS or best (if you have the fonts for a small "GS") IIGS
--Rubywand
____________________________
018- What is "8 bit" and "16 bit"?
Number of bits usually indicates how big a chunk of data a computer's main
microprocessor can manipulate. The Apple IIgs is based on the 65C816 microprocessor
and is considered to be a 16-bit machine. Previous Apple ]['s are based upon pure
8-bit microprocessors such as the 6502 and 65C02. These are considered to be 8-bit
machines. Sometimes II+ or IIe or IIc software is called "8-bit software".
The 65C816 is a member of the 6502 family which includes expanded registers and
adds many new commands while retaining the ability to go into 8- bit mode. So; the GS
can run most 8-bit wares designed for older Apple II machines as well as newer 16-bit
wares. Meanwhile, 8-bit machines are pretty well limited to 8-bit wares. --Rubywand
____________________________
019- How can I tell what version my computer is?
Apple II
Upon Reset, the original Apple II starts you in the system monitor looking at the
"*" prompt. It allows step execution of machine code and has Integer BASIC in ROM. The
major division between kinds of Apple II is Revision 0 and Revision 1. The Revision 1
motherboard adds a number of features including a few which are easily observed:
Power-On Reset: The computer automatically does a Reset when turned On.
More hires colors: To the Black, White, Violet, and Green available on a Rev0 machine,
Rev1 adds Blue and Orange.
Color Killer added: Full-text displays are black&white without the color fringing and
tinting you see on Rev0 machines.
Apple II+
All Apple II+ machines have the Revision 1 or higher motherboard and the
Autostart ROM. On power-up the Apple II+ does a Reset and displays "APPLE ][" at the
top of the screen. If a disk drive is connected, the II+ will try to boot a diskette.
The Apple II+ loses some monitor features (like instruction stepping) and in-ROM
Integer BASIC found in the earlier Apple II; but, it gains the more powerful Applesoft
BASIC in ROM. A II+ Reset normally leaves you in BASIC looking at the "]" Applesoft
BASIC prom
pt.
Apple IIe
You can usually tell a IIe from a II or II+ by the nameplate. On models with the
classic Apple II case but no nameplate, you can check the keyboard. IIe models include
a key embossed with the outline of an apple called the "OpenApple" key located near
the bottom left corner of the keyboard. (All later Apple II's have this key, too; but,
they do not look anything like a II, II+, or IIe). A few IIe models produced for
third parties may have some other special-logo key in place of OpenApple.
Within the IIe series, the major division is between Enhanced and unenhanced IIe
models. Look at your computer while booting. If it says "Apple ][", it is not
enhanced. The enhanced computers will say "Apple //e".
Today, "Enhanced IIe", "//e", and "128k Apple IIe" are used interchangably
because nearly every Enhanced IIe has an Extended 80-Column Card plugged into the
60-pin Aux Slot (which adds 64kB of RAM). Technically, an Enhanced IIe is defined by
the presence of three or four IC's: the 65C02 microprocessor (replaces the 6502), new
Character (or "Video") ROM which includes MouseText characters, and new monitor
firmware in ROM.
If a IIe has the 65C02 microprocessor, it is probably an Enhanced IIe. If your
IIe is not enhanced, you can do the enhancement yourself with an "enhancement kit"
consisting of the four chips you need to swap in.
The last significant upgrade to the IIe series came in 1987 with the release of
the Extended Keyboard //e. This model is a 128k Enhanced IIe-- it comes with an
Extended 80-Column Card plugged into the Aux Slot-- which adds an 18-key 'numeric
keypad'. It also replaces the eight on-motherboard RAM chips with two 64kx4 IC's; and,
it replaces the two BASIC/monitor ROMs with a single large ROM.
Quite a lot of later 80's 8-bit software, including all double-hires software,
requires a 128k Enhanced IIe. (If you have a //c, IIc+, IIgs, Laser 128, or Franklin
Ace 2000-2200, you have good to at least decent Enhanced IIe compatibility.)
Unfortunately, a small number of early-release IIe's can not be upgraded to handle
double-hires. Check the serial number on the motherboard (in the back, by the power-on
led). If it is 820-0064-A, you must change the motherboard to upgrade (unless you have
the PAL
video output version).
The IIe was produced in very large numbers and sold around the world in countries
with different power systems using different video standards. So, it is not all that
unlikely that you may need to check a bargain IIe to make sure it will work in your
home using your monitor. The two major video output formats you may run into are NTSC
(used in the US, Canada, Japan, and most countries with 60Hz power, except Brazil) and
PAL (used in Australia, most of Europe, and most countries with 50Hz power). One w
ay to tell which video standard a IIe uses is the location of the Aux Slot. If it is
on the side of the motherboard near the power supply, you have an NTSC model. If it is
in line with Slot 3, you have a PAL model.
Apple //c and Apple IIc+
Go into Basic and type "PRINT PEEK (64447)" and press return. If it says 255,
you have a very old //c. This model is known to have problems producing accurate baud
rates for serial communications. It's been many years since the //c was released; but,
some long-time Apple dealers may still perform the upgrade for a nominal fee. (Tell
the dealer that the Apple authorization number is ODL660.)
If PRINT PEEK (64447) displays 0, you can use 3.5" drives, but you don't have the
memory expansion connector. If it says 3, you have the memory expansion connector and
can plug in extra memory. If it says 4, you have the latest model of the //c with the
memory expansion connector and other upgrades.
If PRINT PEEK (64447) displays 5, you have an Apple IIc+. The IIc+ also has "IIc
Plus" silkscreened in dark gray onto the upper right corner of the case.
Apple IIgs
There are 3 major versions of the GS: Check the initial power-up screen. It will
probably say ROM-01 or ROM 3. If it does not say either, you have a ROM-00 model. You
must upgrade a ROM-00 machine in order to run current system software. The ROM-01 has
256K on the motherboard, while the ROM 3 has 1 MB on the motherboard. Most of the
enhancements of the ROM 3 are added to the ROM-01 simply by booting up with current
system software. --Dan DeMaggio, CreatSltn, Steve Leahy, Nathan Mates, Bevis King, Davi
d Empson, Jeff Blakeney, David Wilson, Rubywand
____________________________
020- Suppose I just want to start using my Apple II Now!?
Okay; suppose you have zilch info, do not feel like looking through the FAQs, and
want to start Now. The following _may_ be all you need to get going with some game or
utility from diskette:
o The Disk Controller Card for Apple ][, ][+, and IIe goes into Slot 6 (next to last
Slot on the right when viewed from the front). Drive 1 plugs into the top connector
with the ribbon side of the cable plug facing out. Plug in the cable(s) before
plugging in the card so that you are sure the connector and plug line up correctly.
o On the IIgs, the 3.5" drive(s) plug in first, then, the 5.25" drive(s).
o Unless a hard disk is installed, most Apple II's try to boot a diskette and start
DOS 3.3, ProDOS, or GS/OS when turned ON. (On the old Apple ][ you can type in 6
Control-P RETURN to boot from the Monitor, assuming your Controller Card is in Slot 6.
To press Control-P, press and hold Control, then P, then release both keys.)
o Most, but not all, diskettes are bootable. If one diskette doesn't boot, try
another. If no diskettes boot, use a Radio Shack Head Cleaner diskette to clean the
drive head(s).
o If the prompt you see is ], you are in Applesoft BASIC; > indicates Integer BASIC;
and * indicates the Monitor. If both Integer BASIC and Applesoft are in memory, you
can enter FP to switch from Integer to Applesoft and INT to switch from Applesoft to
Integer. To go from either BASIC to the Monitor, enter CALL- 151. To start the current
BASIC from the Monitor, enter Control-B. To go back to BASIC with program and
variables in tact from the Monitor, enter Control-C.
o Except for the ][ and most ][+'s, you must press Control-RESET to do a Reset.
o To boot a diskette when viewing a BASIC prompt, you can enter PR#6 to boot a drive
associated with Slot 6-- usually a 5.25" drive-- and PR#5 to boot a drive associated
with Slot 5-- usually a 3.5" drive. --Rubywand, David Empson
____________________________
021- Where do I find out about Apple II Users' Groups?
Especially for beginners, a user group is an absolute goldmine of software,
information, and bargain hardware.
Many Apple II users groups continue to meet, especially in major cities
and on university campi. If a local group listing is 'missing' from your phone
book, check for a Mac users group-- a number of Apple II groups have merged with
their Mac counterparts.
For more info and links, see Csa2USERGRP.txt or see the links at
http://home.swbell.net/rubywand/A2FAQs9USERGROUPS.html .
____________________________
022- How can I find out more about using and programming my Apple II?
You can peruse the newsgroup FAQs Q&A Contents page. You can also check out the
Apple II Major Sites page (Csa21MAIN3.txt). Here are two good 'getting starting'
places:
Apple II Beginner's Guide
http://Apple2Guide.net/Apple2/
Home of the Apple II
http://www.callapple.org/apple2/
All Apple II's come with some version of BASIC installed in-ROM on the
motherboard. The original Apple II's have Integer BASIC. Starting with the II+ model,
all Apple II's have floating-point Applesoft BASIC in ROM. Owners of early Apple II's
can load in Applesoft or plug in a card with Applesoft ROMs.
There are several good places to find out about Apple II BASIC programming:
Apple II Textfiles
http://www.textfiles.com/apple/
Byte Works (new IIgs GSoft BASIC)
http://www.byteworks.org
Ground
ftp://ground.ecn.uiowa.edu/2/apple2/MiscInfo/Applesoft/
ftp://ground.ecn.uiowa.edu/apple2/MiscInfo/Programming/
ftp://ground.ecn.uiowa.edu/2/apple2/apple8/Beagle.Oldies/
Tarnover
http://tarnover.dyndns.org/
The comp.sys.apple2.programmer newsgroup and Csa2P FAQs
for programming Q&A plus more links
http://home.swbell.net/rubywand/csa2pfaq.html
Besides BASIC, you can load and use many languages including Fortran, Pascal,
Modula, C, Logo, Forth, Assembly, and others. The Apple II "Monitor" included in-ROM
lets you enter 6502 and (on a IIgs) 65816 machine language programs. IIgs owners can
also create Hyperstudio and HyperCard stacks. For more information and links go to the
comp.sys.apple2.programmer FAQs (see URL above).
There is really no substitute for having the technical manual for your particular
Apple II or clone. The manual for the ][ and ][+ is the Apple ][ Reference Manual. For
the IIe and IIc you want Apple's Technical Reference Manual for your machine. For the
IIgs you will want, at least, the IIgs Hardware Reference and IIgs Firmware Reference.
Naturally, you will want to get manuals and materials covering DOS, ProDOS,
BASIC, and many other areas relating to your Apple II. Below is a decent 'getting
started' sampling:
General Apple II
Apple II Reference Manual from Apple
Apple II User's Guide by Poole, Martin, and Cook
Note: Third Edition, 1985 (Apple II User's Guide for APPLE II Plus
and APPLE IIe) is completely revised to include ProDOS coverage
Beagle Bros "Peeks, Pokes, and Pointers" (poster) by Beagle Bros
The Apple II Circuit Description by Winston D. Gayler
Understanding the Apple ][ by Jim Sather
What's Where in the Apple II? by William F. Luebbert
Applesoft BASIC and Assembly Language
Assembly Lines: The Book by Roger Wagner
BASIC Programming Reference Manual from Apple
Programming the 65816 Including the 6502, 65C02, and 65802
by David Eyes and Ron Lichty
65816/65802 Assembly Language Programming by Michael Fischer
DOS, ProDOS, and GS/OS
Apple IIgs GS/OS Technical Reference (Apple/ Addison-Wesley)
Beneath Apple DOS by Worth & Lechner
Beneath Apple ProDOS by Worth & Lechner
Exploring Apple GS/OS and ProDOS 8 by Little
ProDOS Inside and Out by Doms and Weishaar
ProDOS Technical Reference Manual (Apple/ Addison-Wesley)
The DOS Manual from Apple
Some technical manuals and other materials can be obtained in original or reprint
form from Byte Works and Kula Soft. Major book sellers, such as Amazon list many Apple
II books. For current Kula Soft, Byte Works, and other seller links, see Vendors Q&A
in Csa21MAIN2.txt or go to ...
http://home.swbell.net/rubywand/A2FAQs3VENDORS.html#020 .
Though most Apple II books are out of print, many sellers will search for and, with
luck, locate the book you want.
Apple II manuals and other books also turn up for sale on Csa2 newsgroups like
comp.sys.apple2.marketplace, at used book shops, and at local Users Group swap meets.
Some manuals and other items, such as Reference Cards and posters (usually in Text or
HTML form) are available for downloading at the major Apple II archives and other
support sites. (See Q&A 005 above.)
You may be able to find a local Apple II users' group or a group on-line that you
like. Besides knowledgeable users, you will often find a software library stocked with
useful software. (See Csa2USERGRP.txt.)
Another good resource is a subscription to an Apple II newsletter or magazine;
and, don't overlook collections of major Apple II magazines published through the
1980's (e.g. inCider, Nibble, Computist, etc.). They are virtual encyclopedias
covering many areas of II computing. For current publishers and net sites which offer
on-line copies of back issues see Q&A 005 above.
Often, the easiest, quickest way to an answer for some Apple II question is to
'just ask it' on comp.sys.apple2 and/or another Csa2 family newsgroup. There are no
Csa2 rules about posting to just a newsgroup which deals with a particular topic or
making sure your question is hard enough or reading the FAQs first. Supplying
information is the main purpose of the newsgroups. -- Rubywand, David Wilson, Tony
Cianfaglione, Steve Sanders, Terence J. Boldt, Wayne Stewart
| <-- __Chronological__ --> | <-- __Thread__ --> |
