Re: how to port uC/OS-II 2.52 into ARM?

> > suppose I am very "smart" and installed and upload a "OS" in mcu,
> > will it like
> > boot like a linux.
> >
> > #  ls ---show all the files for example
> > # ftp--- transfer files back and fore ...etc.
> >
> >
> > it said it will cater certain tasks to be optimised whatever you
> > would like to be in your mcu.
> > you tuned it and fine-tuned with mcu 's parameters in overview sense.

"The on-board computer is based on an Atmel AT91M40800 32 bit RISC processor
running at 16 MHz with 2 Mb Flash, 1 Mb RAM, and 16 kb ROM for radiation-
and fault resistant boot software. The software in the flash can be changed
by ground station command. The computer runs the free operating system eCos
and a packet handler system to communicate between processes. The ROM
contains a boot- and failsafe mode programmed directly in c, capable of
safeguarding the satellite in failure modes and receiving software updates
via the radio link. "

but why it has upload capacities, the ecos must have a ftp function? is it
not?