Re: USOC Split Pair Problem...

Open on pins 1 & 8, yes.  But if the tester is setup for 568A or B, pin 
2 is paired with pin 1.  On USOC, it pairs with 7.  Pins 3 & 6 are 
paired in either pinout, as are 4 & 5.


CIAO!

Ed Nielsen
CENCOM
http://www.cencom94.com

Michael Quinlan wrote:
> He's using 6 conductor cables for connecting the tester and the
> remote.  I don't see how this would result in a split pair condition
> when testing with a 586(A/B) tester.  Wouldn't he just get an open on
> pins 1 and 8?