Re: HSG80 Firmware / Drive capacity question

The official word when 146 GB drives was released was ACS 8.6F-10 at a
minimum to support that capacity. Of course, it's usually best to try to use
the latest firmware, ACS8.7-4 as far as I know.
SecurePath 4.0c is the latest, but I don't see any direct connection between
146GB drives and SecurePath 4.0c.
/charles

"Ramcke545" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> 146 GB drives on an HSG80 require firmware 8.7, you should also upgrade to
> SecurePath 4.
>
>
> "Mike Povall" <[EMAIL PROTECTED]> wrote in message
> news:[EMAIL PROTECTED]
> > From memory you should be OK with 8.6. I don't remember there ever being
> > anything in QuickSpecs that specified that they were only supported on
8.7
> > and later.
> >
> > Cheers, Mike.
> >
> > "Tim" <...> wrote in message
news:[EMAIL PROTECTED]
> > > Hello,
> > >
> > > I was wondering if my HSG80 at firmware 8.6F supports 146GB drives, or
> do
> > I
> > > need to upgrade my firmware to 8.7?
> > >
> > > TIA