Re: How to bring PLL's output to Pin_F1

>I know I can bring the PLL's output to "clock output pin" (i.e. U31 or
>Y3), but, can I bring it to non-clock output pins?

I'm not familiar with the internals of the APEX EP20K1500.

If it was a Xilinx chip, I would use the normal special clock
distribution resources to route the clock to a FF next to
the output pin, toggle that FF, and then connect that FF
to the output pin.

-- 
The suespammers.org mail server is located in California.  So are all my
other mailboxes.  Please do not send unsolicited bulk e-mail or unsolicited
commercial e-mail to my suespammers.org address or any of my other addresses.
These are my opinions, not necessarily my employer's.  I hate spam.