Re: AVR Reset Problem

A 1k resistor from the reset pin to 5V and a 100n cap to ground should do
the trick...


artem <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> > I am using the AT90S2313 in a pulse generating project but I am having
> > trouble getting the AVR to come out of reset.
> >
> > When I reset, or initially apply power, the AVR will not proceed to
> > execute until I ground Pin 4, which is one of the crystal pins.
>
> Try to use "supervisor" like MCP100 or something like this.
>
> Maybe you power rising front is't fast.
>