Re: ColdFire tool recommendations?

 said for all posterity...

> 2)Medium volume our modules are $99.00 in quantities > 100 less for more than 1000 
> pcs.
> At 1000 or less  pcs you would be hard pressed to actually 
> design, build and test modules for less than $99 if you truely account for
> your production engineering costs, setup costs, material acquisition costs etc...
> 
> 
> 3)Higher volumes ucLinux, ecos, rtems etc....
> Our site license is $24500 for 
>       1)Known working hardware design.
>               1a)All hardware design materials.
>               1b)Design review by NetBurner of any changes you make.
>               1c)Assistance with production test and bring up code etc...
> 
>       2)Windows hosted Tools are all built and integrated. Just install from CD.

The problem in my case is that we have to have custom hardware, but 
our quantities are only about 200-300 units.  We can't use your 
modules because of our hardware design requirements, but the site 
license ($24,500) is prohibitive for our low-cost product.


Casey

I drive way too fast to worry about cholesterol.